Structural analysis and design software | EdiLus (2023)


What structures can I model and calculate with EdiLus?

With EdiLus it is possible to proceed with the design and verification of new or existing reinforced concrete and ordinary masonry structures and new reinforced masonry and steel structures.

EdiLus is a structural calculation software specially designed and developed for the modeling and calculation of buildings intended for residential, public, office and commercial use. It is in this context that you can make the most of all the power, simplicity and modelling speed of EdiLus. The EdiLus solution isn't suitable for designing bridges, infrastructure works, railway networks, structures with precompressed elements and dams.

What types of analysis can I perform with EdiLus?

With EdiLus you can perform static and seismic linear analyses.

With regard to seismic calculations, it is possible to choose between equivalent static analysis and modal dynamic analysis.

Can I calculate mixed structures?

EdiLus can be integrated with optional modules for the design and calculation of reinforced concrete structures, masonry structures, steel structures, structures with wooden elements and adaptation of existing buildings.

(Video) The Best Structural Design Software and Top 5 Best Software for Structural Analysis and Design

By integrating the appropriate calculation modules, it will therefore be possible to proceed with the calculation and verification of mixed structures.

What types of reinforcement interventions can I apply to existing elements?

With the Masonry module, you can design seismic adjustment or improvement interventions with reinforced concrete plating, carbon fibers (FRP), fiber-reinforced materials (FRCM), ties, pre-compression cables, etc.

With EdiLus Concrete, for reinforced concrete buildings, you can design seismic improvements or adaptation interventions in which it is possible to apply both reinforcements on existing elements and insert new structural elements such as new columns, walls, share walls, bracings, etc. to model for example roofs, rised level structures and carry out an overall verification.

Accessing a special menu, you can choose the type of intervention from the following:

  • FRP Plating for Bending;
  • Plating with FRP for shear stresses;
  • Height Incrementation;
  • Reinforced concrete jacket linings;
  • Steel Jacket linings;
  • FRP plating;
  • Node Confinement;
  • Reinforcement with reinforced plaster mortar on walls;
  • Reinforcement with FRP on Walls;
  • Underpinning.

What type of modeling is supported for masonry structures?

EdiLus Masonry adopts the innovative calculation method with triangular HP-SHELL schematization with multilayer variable thickening that allows you to perform the modeling of the structure in strict compliance with the different types of materials present, without assuming simplified assumptions on the data of the materials that are necessarily approximate.

The schematization with HP-SHELL elements allows you to know, from the simple structure drawn, the actual stress state of the masonry at each point and to take into account in the model all the elements characterizing an existing building in masonry (variation of materials, non-aligned holes, presence of different materials, interventions over time, etc.).

The resistant wall elements (spandrels and piers) are automatically identified and the relevant legal checks are also carried out.

You can also request the analysis of local mechanisms (overturning and facades bulging) and the design/checking of reinforced concrete or masonry foundations.

Can I model steel structures?

(Video) Top 05 Structural Design & Analysis Software For Civil Engineers

Yes, with the EdiLus Steel module you can design and calculate steel structures or individual steel elements within structures made of other materials.

Can I model wooden structures?

EdiLus allows you to also calculate wooden elements to complete reinforced concrete or masonry structures such as roofs, canopies, etc.

The module is not designed to calculate a full wooden structure as it does not provide the specific settings for the seismic calculations of this type of structure (behavior factor, dissipative checks of the structural elements, etc.).

However, it is possible to model and calculate a completely wooden structure by defining the NON-DISSIPATIVE behavior or by paying attention to the correct definition of the behavior factor (to be defined manually) or any other settings for the seismic calculation.

EdiLus has been developed for the design of new buildings and for the verification of interventions such as improvements and seismic adaptations of existing buildings that therefore involve the behavior and verification of the structure as a whole.

It doesn't support the verification of isolated repairs.

However, this does not mean that it is not possible to model and verify/design even individual elements or some structural parts (such as roofs, foundations, etc.).

It is up to the user to demonstrate that the local intervention does not change the behaviour of the other parts or on the structure as a whole and that the interventions do not result in a reduction of the pre-existing safety levels.

In which formats can I export construction drawings?

With EdiLus you can export all relevant construction drawings in dwg/dxf file formats, PDFs and the 3D view of the structure in the IFC format, typical of BIM models.

What documents can I produce with EdiLus?

(Video) Structural Analysis and Design Software for Steel Structures | RFEM 6 & RSTAB 9 by Dlubal Software

Automatically obtain all the project documentation directly from the BIM model, in accordance with the most recent legislative provisions: carpentry frameworks, reinforcement schedules, general technical reports, calculation results, geotechnical report, working drawings, maintenance plans and the structure's cost estimate (with PriMus).

Do I also get the verification of steel and wood connections?

Steel member connections design is integrated within the structure calculation.

With regard to the steel module, you can choose between different types of connections (flange, square, gusset plates, splice plates, anchor bolts, etc.) and define the geometry with graphical input and guided in compliance with the regulatory indications.

With regard to the wood module, you can define wood-wood connections with metal type connectors for 90° intersections between horizontal beams and/or columns and wood-r.c. connections with socket-type metal connectors between wooden columns and RC foundations or between 90° intersections with horizontal beams and RC columns and/or walls.

In addition, for some situations it is also possible to define a notch type connection, in the contact areas, where the software proceeds to shape the rods appropriately by defining notches in detail and support areas to perform a timely contact tensions check.

The software provides a detailed view of the construction details contextual to the three-dimensional view of the object connection.

With special duplication functions, you can replicate each connection in all the other similar conditions present in the structure.

Please note that connections can only be entered and calculated for some types of sections and for some predefined geometric configurations.

This means that you will not "always" be able to get a full connections check.

With EdiLus, read the calculation results directly on the model.

See loads, stresses, deformations, stresses, vibration modes, safety coefficients, collapse accelerations, etc.

Also, view the various calculation results in 3D and color mapping for quick control.

Can I import files in dxf/dwg format for structure input?

(Video) SkyCiv Structural Analysis and Design Software: A New Experience | Flexible Subscription

Of course! You can import drawings in DXF/DWG format at various levels of the program.

We have also developed special functions that allow the automatic generation of structural objects starting from the imported dxf/dwg.

Can I import the building's 3D architectural model in IFC format?

EdiLus is the first Italian BIM authoring software for structural calculation with buildingSMART international certification for IFC import and export. With EdiLus you can, for example, import the digital model of the architectural project created with an architectural BIM design software (for example: Edificius, Revit, Allplan, ArchiCAD, VectorWorks, etc.) and continue to work on the structural design and analysis aspects in 3D in accordance with the design requirements as established by other design team disciplines.

Can I export the building's 3D structural model in the IFC format?

Absolutely. EdiLus allows you to export the 3D view of the structure in the IFC format typical of BIM models.

With what set of regulations can I perform structural calculations?

The following regulations are currently implemented in EdiLus:

  • Brazilian NBR Standards for Reinforced Concrete and Steel Construction;
  • Eurocodes.

Of course! A special Reinforcements editor allows quick modification and customization of the reinforced concrete elements with an immediate review of the structural members while keeping everything under control.

(Video) Structural Analysis and Design Software for Concrete Structures | RFEM 6 & RSTAB 9 by Dlubal Soft...


Which software is best for structural analysis? ›

Top 10 structural analysis software
  1. ETABS. ETABS is a software developed by a company called Computers and Structures Inc (CSI). ...
  2. SAP 2000. ...
  3. STAAD PRO. ...
  4. RAPT structural engineering software. ...
  5. Tribby3d. ...
  6. RAM Concept. ...
  7. Microstran structural engineering software. ...
  8. Strand 7.
15 Dec 2021

Is Tekla structure good? ›

Tekla Structures is a great software with a variety of unique capabilities for optimizing both concrete and steel construction. It saved my time during designing different types of steel structures. The software is user-friendly, and easy to learn. Review collected by and hosted on

Which is better Tekla vs Etabs? ›

In reinforced concrete design it is rather slow. So the answer is: Definitely ETABS as it is far more specialized and is efficient with a variety of materials, construction codes, structural analysis and modeling techniques. What is the difference between CSI, ETABS, and Tekla?

Which software is best for PEB structure design? ›

Most structural engineers use STAAD (from Bentley) to do structural analysis. MBS (Metal Building Software) which gives the most accurate estimation, designing and detailing of PEB buildings, along with shipping lists and 3D drawings is a widely used and popular software.

Is Etabs a BIM software? ›

Revit is one of the widely used applications in the BIM industry, it uses an external application named - Robot Structures for design purposes, whereas ETABS is an analytical and design software.

Is ETABS better than STAAD pro? ›

If a person is designing a reinforced concrete structure, ETABS is preferable to STAAD.Pro. Compared to STAAD.Pro, the user interface is simple, and the analysis values are more accurate and cost-effective.

Is Revit better than STAAD pro? ›

Reviewers felt that Revit meets the needs of their business better than STAAD.Pro. When comparing quality of ongoing product support, reviewers felt that STAAD.Pro is the preferred option. For feature updates and roadmaps, our reviewers preferred the direction of Revit over STAAD.Pro.

Is Tekla better than AutoCAD? ›

When assessing the two solutions, reviewers found Tekla Structures easier to use, administer, and do business with overall. However, reviewers preferred the ease of set up with AutoCAD. Reviewers felt that AutoCAD meets the needs of their business better than Tekla Structures.

Which is better Revit or Tekla? ›

Revit has 291 reviews and a rating of 4.58 / 5 stars vs Tekla Structures which has 29 reviews and a rating of 4.45 / 5 stars. Compare the similarities and differences between software options with real user reviews focused on features, ease of use, customer service, and value for money.

Is Revit better than Tekla? ›

Reviewers felt that Revit meets the needs of their business better than Tekla Structures.

Is Tekla hard to learn? ›

Tekla Structures is one of the most capable and advanced systems in its field, but one downside to this is that it takes a little longer to learn as it has more tools, settings, possibilities, and opportunities for customization.

Which is best Tekla or staad pro? ›

When assessing the two solutions, reviewers found Tekla Structures easier to use and do business with overall. However, reviewers preferred the ease of set up with STAAD.Pro, along with administration. Reviewers felt that Tekla Structures meets the needs of their business better than STAAD.Pro.

Why is ETABS the best? ›

ETABS has one of the most easy and intutive interfaces for modelling. ETABS allows the user to model with a very friendly graphical mode. There is also an editor mode which rarely needs to be used as the graphical interface gives you sufficient options to model complicated structural models with ease.

Which software is used for structure design? ›

List of structural engineering software
SketchUpBIM & 3D modeling software applied for civil & structural engineering
STAADBIM & 3D structural analysis & design software for structural engineers
Tekla StructuresBIM & 3D modeling software for civil & structural engineers
17 more rows

Which software is mostly used by architects? ›

Top Ten Design Software for Architects
  • Rhino 3D. Since its creation in 1998, Rhino 3D has become one of the most popular tools for architectural design. ...
  • Revit Architecture. The building information modelling (BIM) concept is key in modern architecture. ...
  • SketchUp. ...
  • V-Ray. ...
  • AutoCAD. ...
  • Maya. ...
  • ArchiCAD. ...
  • Grasshopper.

Which software is best for civil design? ›

Highway Design Software
  • 3DEEP. ...
  • ACCECALC. ...
  • Autodesk Navisworks. ...
  • Bentley Navigator. ...
  • PLAXIS3D tunnel software. ...
  • Flac3D. ...
  • Microsoft Project. Microsoft Project is a civil engineering project management software. ...
  • Primavera P6. Primavera P6 is Oracle's enterprise civil engineering project portfolio management software.
27 Mar 2021

Is BIM better than AutoCAD? ›

CAD has rapidly been overtaken by BIM though, as BIM offers real-time visualisation and model-analysis that is better suited to the construction industry. The use of BIM allows architects, contractors and engineers to work together throughout the project using the same database and building model.

Is Revit the only BIM software? ›

Revit is just one of many software applications under the BIM umbrella that lead to an efficient design of space. Revit is the main application that falls under BIM, but there are other applications designed to perform certain functions that Revit cannot achieve or is ineffective at tackling.

Is ETABS free for students? ›


How long does it take to learn ETABS? ›

FeaturesClassroom Training
Duration16 Hrs Fixed
Additional cost for studentTravel, Accommodation to reach the venue
RefundOnly before training program starts
8 more rows

What is the salary for STAAD pro? ›

Employees who knows earn an average of ₹20lakhs, mostly ranging from ₹12lakhs per year to ₹30lakhs per year based on 5 profiles. The top 10% of employees earn more than ₹27lakhs per year.

Is STAAD Pro still used? ›

Today, STAAD Pro is one of the popular and widely used software for structural analysis and design across the globe by Civil engineers. It supports all types of various steel, concrete, and timber design codes.

Should I learn AutoCAD or Revit? ›

Autocad is more geared towards 2D drawings while Revit is a 3D modeling program. If you're interested in architecture or engineering, Revit would be the better option. But if you're just starting out and aren't sure what you want to do yet, Autocad would be a good place to start.

Is Revit harder than AutoCAD? ›

In conclusion, Revit is harder to use than AutoCAD. Although it offers more features, the learning curve is much steeper. If you are already familiar with AutoCAD, it will be much easier for you to learn Revit. However, if you have no experience with either program, I would recommend starting out with AutoCAD.

What companies use Tekla? ›

Who uses Tekla?
CompanyWebsiteCompany Size
Valtech SEvaltech.com1000-5000
Investopedia, LLCinvestopedia.com50-200
Meta Platforms,>10000

Is Revit and Tekla same? ›

Key Differences between Tekla vs Revit

The first and major difference of both software is that Tekla is designed especially for defining the structure of steel or concrete and has accuracy for giving detailing of complex cross-sections.

Who uses Tekla software? ›

Tekla allows structural drafters and engineers to design a building structure and its components using 3D modeling, generate 2D drawings and access building information.

Do professionals use Revit? ›

Revit is a commercial building information modeling (BIM) software by the company Autodesk. It's generally used by architects, structural engineers, mechanical, electrical, and plumbing (MEP) engineers, designers, and contractors.

Is solidworks better than Revit? ›

Revit and SOLIDWORKS both meet the requirements of our reviewers at a comparable rate. When comparing quality of ongoing product support, reviewers felt that SOLIDWORKS is the preferred option. For feature updates and roadmaps, our reviewers preferred the direction of Revit over SOLIDWORKS.

Can I learn Tekla online? ›

First steps in Tekla Structural Designer

Free interactive eLearning course for new users consists of a series of modules showing you the essentials for working with Tekla Structural Designer.

Is Sketchup better than Revit? ›

Revit vs Sketchup: the differences

Overall, Revit is aimed at more complex projects of whole infrastructures. Sketchup would handle such a project too, but it's much better fitted for interior design thanks to 3D visualization tools.

Which is better BIM or Revit? ›

But the fact is, Revit is not BIM. BIM (Building Information Modelling) is a process/technology/ platform and Revit is one of the many BIM tools/applications available like ArchiCAD, AECOsim, Edificius etc. Thus, a 3D model designed using the Revit application is designed for BIM.

What is better than Revit? ›

Other important factors to consider when researching alternatives to Revit include user interface and 3d models. We have compiled a list of solutions that reviewers voted as the best overall alternatives and competitors to Revit, including SketchUp, Archicad, MicroStation, and Blender.

What programming language does Tekla use? ›

Tekla Structures applications are developed in the C# programming language.

Is Tekla a BIM software? ›

Tekla Structures - powerful structural BIM software

Create, combine, manage and share information-rich accurate 3D models that bring efficiencies at every phase of the construction project.

What is the main benefit of Tekla software? ›

The software allows us to build even the most complex of structures with relative ease. Tekla is exceptionally versatile, and there is a seemingly unlimited amount of structures that we can model using the system. Our team can incorporate high detailed information thanks to the flexibility of the BIM software.

Which is better AutoCAD or STAAD pro? ›

When assessing the two solutions, reviewers found AutoCAD easier to use. However, STAAD.Pro is easier to set up and administer. Reviewers also preferred doing business with STAAD.Pro overall. Reviewers felt that AutoCAD meets the needs of their business better than STAAD.Pro.

Is STAAD Pro for mechanical engineers? ›

The class is appropriate for all disciplines, architects, civil engineers, structural engineers & mechanical designers- Diploma & Above.

Which laptop is best for Tekla Structures? ›

#1 ASUS ZenBook 14 Ultra-Slim Laptop
  • CPU: Intel Core i7-10510U processor.
  • OS: Windows 10 Pro 64bit.
  • Screen Size/Display: 14 inches, 1920×1080, FHD.
  • RAM: 16GB.
  • Storage Capacity: 512GB SSD.
  • Graphical Processing Unit: NVIDIA GeForce MX250 GDDR5 2GB.

Is graphic card necessary for ETABS? ›

Recommended: Discrete video card with NVIDIA GPU or equivalent and dedicated graphics RAM (512 Mb or larger) for DirectX graphics mode. The card must be DirectX 11 Compatible. DirectX graphics mode fully utilizes the hardware acceleration provided by a GPU and dedicated graphics RAM.

What are disadvantages of ETABS? ›

But some beams are failed in shear in ETABS.
  • Cannot edit input file directly.
  • Cannot print and read input file as easily as STAAD (no manual available)
  • In large models, some loads,etc may be missed out - hard to check.
  • Analysis was slower and consumed more disk space (when I tried out a couple years ago, not sure now).
15 Aug 2011

What is the difference between AutoCAD and ETABS? ›

AutoCAD includes features like Architecture, User Interface, Map Section and Design tools. CSI Etabs is known for functionalities like BIM Modelling, Design tools, Building Management System and Analysis.

Can Revit do structural analysis? ›

Complete structural engineering workflows

Design, analyze, and detail concrete and steel structures with Revit, Robot Structural Analysis Professional, and Advance Steel.

What is the use of structural analysis software? ›

A structural analysis and design software performs an accurate set of calculations without all the complex procedures. The software enables engineers to evaluate the effects of moments, point loads, and distributed loads on a design or structure.

Is BIM a software? ›

BIM software is 3D design and modeling software that can help optimize the work of designing for architecture, construction, plant, civil, and MEP projects. It does this by: Helping make better design decisions and improve building performance.

Do architects use AutoCAD or SketchUp? ›

Architects and engineers looking to create floor plans or blueprints will probably choose AutoCAD. It's been the standard-bearer for four decades now. It was also quite expensive. Graphic designers, filmmakers, and product engineers likely will select SketchUp for its 3D prowess.

Which civil engineering software is easy? ›

AutoCad Civil 3D

Easily the most used program in the industry, Civil 3D is a civil engineering drafting software with a multitude of design, analysis and simulation tools for civil engineering design. If we're talking high level, we use CAD to create sets of plans known as construction documentation.

Which is better Civil 3D or Revit? ›

Reviewers felt that Revit meets the needs of their business better than Civil 3D. When comparing quality of ongoing product support, reviewers felt that Revit is the preferred option. For feature updates and roadmaps, our reviewers preferred the direction of Revit over Civil 3D.

Which is better Civil 3D or AutoCAD? ›

Results showed that Civil 3D could allow a user to complete tasks up to 20 times faster compared with AutoCAD, when these tasks were performed by an experienced Civil 3D user.

Can Revit replace AutoCAD? ›

Can Revit Replace AutoCAD? It is a good practice to start with a pilot project, and then start each new project in Revit. Over time, Revit can replace AutoCAD.

Is Revit hard to learn? ›

Revit is a legitimately difficult software to master, even with training. Revit (and other BIM software) comes with a pretty hefty learning curve for beginners. Layer on the complexity of the projects at STG, and Revit often remains difficult to use even after a couple of years in practice.

Is BIM difficult to learn? ›

Building Information Modelling (BIM) if full of professional / technical jargon that confuses even people with many years' experience in construction. Learning the processes is simple when you have an understanding of what the language actually means.

Is CAD or Revit better? ›

What's the difference between Revit and AutoCAD? The biggest difference is that AutoCAD is a CAD software and Revit is software for BIM. While AutoCAD is a general drawing tool with broad application, Revit is a design and documentation solution, supporting all phases and disciplines involved in a building project.

Is BIM replacing CAD? ›

BIM and CAD are not fundamentally different, BIM is a new way of developing collaborative workflows within a CAD enabled environment.

Can BIM replace CAD? ›

From CAD to BIM

The point of BIM isn't to replace or upgrade CAD workflows, but rather to make these drawings part of a centralized ecosystem of project management. One that puts the building model at the core and updates in tandem with the project.

Which country uses BIM most? ›

Germany: Approximately 70% of German construction companies use BIM at different levels. However, the majority are architects and design companies, making use of BIM in the design phase rather than construction and operation. Since 2017, BIM has been mandatory for projects worth over €100 million.

Is there future in BIM? ›

The Growing Popularity of BIM Services

But in the current digital era, it is making its way to the future of the AEC industry. BIM is already being implemented in dozens of nations, and it has the caliber to be a game-changing technology.

Is BIM outdated? ›

BIM alone does not facilitate long-term structural maintenance. All too often, BIM becomes an obsolete asset after completion of a project. All of this important building information goes to waste once the structure is operational.

Does AutoCAD do structural analysis? ›

Robot Structural Analysis is available only in the Architecture, Engineering, and Construction Collection. The price of an annual Architecture, Engineering, and Construction Collection subscription is $3,270 and the price of a monthly Architecture, Engineering, and Construction Collection subscription is $410 .

What is computer software in structural analysis? ›

Structural analysis software is a computer program that engineers use to design structures such as buildings and other large- and small-scale projects more efficiently.

Can Ansys be used for structural analysis? ›

Ansys offers structural analysis software solutions that enable engineers of all levels and backgrounds to solve complex structural engineering problems faster and more efficiently.

What are the different software used in analysis of structure? ›

SAP2000 is a general-purpose software used for civil engineering for designing and analysis of the structural systems.

Can I use Revit for structural analysis? ›

Revit Structure supports the building information modeling (BIM) process for structural engineers by providing a physical model to use for documentation and an associated analytical model to use for structural analysis and design.

Is solidworks good for structural analysis? ›

SOLIDWORKS® Simulation is an easy-to-use portfolio of structural analysis tools that use Finite Element Analysis (FEA) to predict a product's real-world physical behavior by virtually testing CAD models. The portfolio provides linear, non-linear static and dynamic analysis capabilities.

What is Tekla used for? ›

Tekla Structures is used in the construction industry for steel and concrete detailing, precast and cast in-situ. The software enables users to create and manage 3D structural models in concrete or steel, and guides them through the process from concept to fabrication. The process of shop drawing creation is automated.

Which tool is used for structural designing? ›

Which tool is use for structured designing ? Explanation: A Structure Chart (SC) in software engineering and organizational theory, is a chart which shows the breakdown of a system to its lowest manageable levels.

Does NASA use ANSYS? ›

NASA has awarded ANSYS Inc of Canonsburg, Pennsylvania, a contract to provide a suite of modeling and simulation tools including capabilities in the following engineering disciplines: structures, crash, thermal, fluids, photonics, semiconductors, electromagnetics, materials, mission, test, evaluation, and orbit ...

Do civil engineers use ANSYS? ›

ANSYS Civil helps engineers/designers to review the power of the range of variables in a virtual environment.

Is ANSYS better than Matlab? ›

Ansys Fluent rates 4.5/5 stars with 80 reviews. By contrast, MATLAB rates 4.5/5 stars with 658 reviews. Each product's score is calculated with real-time data from verified user reviews, to help you make the best choice between these two options, and decide which one is best for your business needs.

Which software is used for analysis purpose? ›

Comparison of Top Data Analytics Tools
Data Analysis ToolPlatformRatings
Tableau PublicWindows, Mac, Web-based, Android, iOS5 stars
Rapid MinerCross-platform5 stars
KNIMEWindows, Mac, Linux.4 stars
OrangeWindows, Mac, Linux.4 stars
7 more rows
25 Oct 2022

What are the 4 main types of structures? ›

The four types of organizational structures are functional, multi-divisional, flat, and matrix structures.

What is the importance of structural analysis software in civil engineering? ›

Structural analysis primarily focuses on the data needed to ensure a software or model performs its functions. As a result, it requires a logical approach. Engineers and architects train such skills extensively. This allows them to convert project requirements into a model or program that meets the client's needs.


1. Structural Analysis and Design Software Online, Instantly From Your Web Browser.
2. Structural Engineering Software Programs Used In The Industry
(Mat Picardal)
3. What Software does a structural engineer need to know.
(Brendan Hasty)
4. Top 5 Structural Design and Analysis softwares
5. Trailer: RFEM 6 | New Structural Analysis and Design Software
(Dlubal Software EN)
6. SACS Offshore Structural Analysis and Design Software
(Bentley Offshore Analysis)
Top Articles
Latest Posts
Article information

Author: Allyn Kozey

Last Updated: 01/10/2023

Views: 6789

Rating: 4.2 / 5 (43 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.